Description
Product Description
Plastobond TFS 906, 922, 936 is solution for fixing all types of floor, wall tiles, & natural stones. It is prepared under recommendation of Green India Clean India concept of I.G.F with comply the requirements of ISO 9001:2015 & ISO 14001:2015 with BBP-Technology. It is premix solution of Basalt sand with binder & HGP (Polymers). All ingredients of Plastobond are mix together with uniform moisture free consistency & packed into 20 Kg & 40 Kg laminated airtight GBD bag to insure 6 months validity.
Instructions:
Always store in covered & dry place.
Before applying surface must be clean from dust and Oil.
Surface must be wet before Application.
For best results always add Plastobond in water to make smooth paste.
Always apply minimum 4 to 5 mm uniform thick layer for best Results.
Use proper tools for application.
Features & Advantages
Features & Advantages
Purely Green Environmental product.
Crack proof with water resistant.
Save time & easy to use.
Higher adhesion strength.
Low cost with maximum efficiency.
High Bond Strength.
Results
Results & Specification
Appearance | Greyish / White powder with granules |
Pot life | 30 minutes |
Water demand | 18 to 22% |
Comprehensive strength | 12 to 14 MPa |
Bulk Density | 1350 – 1700 kg/ m3 |
Hard set | 20 hrs |
Coverage | 2-3 sq.ft/ Kg with 2mm thickness |
Warning
Warning
There are no toxic materials in the product. Care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes wash gently with plenty of water, take medical advice if needed.