Description
Product Description
Plastobond PMP 919 is a premix for all types of plastering work with High strength & quality for long lasting. It is prepared under Green India Clean India concept of I.G.F with comply the requirements of ISO 9001:2015 & ISO 14001:2015 with BBP-Technology. Materials such as well graded process sand with binder & additives. All ingredients of Plastobond are mix together with uniform moisture free consistency & packed into 40 Kg laminated airtight GBD bag to insure 6 months validity.
Plastobond PPS 917 is a packed process sand for all types of plastering work in construction industry. It is prepared under recommendation of Green India Clean India concept of I.G.F with comply the requirements of ISO 9001:2015 & ISO 14001:2015 with BBP-Technology materials such as well graded process sand. After drying & sieve analysis Plastobond PPS 917 packed into 40 Kg laminated airtight GBD bag.
Instructions: PMP 919
Always store in dry & covered place.
2 to 3 days curring on surface before plastering is compulsory.
Use proper water ratio for mixing Plastobond.
For better results always apply 10 to 12mm thickness of plaster.
7 to 8 days post curring after plastering is compulsory.
Proper tools to be used for application.
Features & Advantages
Features & Advantages
Easy to use & storage.
Green Environmental product.
Shrinkage & Crack Resistance.
No rebounding & wastage.
Provide better surface for paint.
High Bond Strength.
High Compressive Strength.
Available around the year.
Easy to use & storage.
Green Environmental product.
Low cost with maximum efficiency.
Shrinkage & crack resistance.
No rebounding & wastage.
Increase work efficiency of the worker.
Provide better surface for paint.
Available around the year.
Results
Results & Specification
Appearance | Grayish powder with granules |
Aggregate | Salt free well graded sand |
Aggregate size | Maximum up to 4.2 mm |
Basic binder | OPC with Plastomentt. |
Additives | HGP with fiber |
Dry Bulk density | 1.4 to 1.7 kg / liter |
Pot life | 45 to 60 minutes |
Water Demand | 15 to 20% |
Final Setting Time | 8 to 12 hrs |
Compressive strength | 13.00 N/mm2 ( 28 days) |
Coverage | Approx 16 to 17 sq.ft with 10 -12 mm on AAC blocks. |
Appearance | Grayish granules |
Aggregate | Salt free well graded sand |
Aggregate size | Maximum up to 4.2 mm |
Dry Bulk density | 1.4 to 1.7 kg / liter |
Warning
Warning
There are no toxic materials in the product. Care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes wash gently with plenty of water, take medical advice if needed.