Description
Product Description
Plastobond DMC 920 is ready to use concrete for all types of RCC work to provide higher & durable strength. It is prepared under recommendation of Green India Clean India concept of I.G.F with comply the requirements of ISO 9001:2015 & ISO 14001:2015 with BBP-Technology. It is premix of dry materials such as well graded aggregates & process sand with binder and additives. All ingredients of Plastobond are mix together with uniform moisture free consistency & packed into 40 Kg laminated airtight GBD bag to insure 6 months validity.
Plastobond SGC 927 is suitable for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc. It is prepared under recommendation of Green India Clean India concept of I.G.F with comply the requirements of ISO 9001:2015 & ISO 14001:2015 with BBP-Technology. All ingredients of Plastobond SGC 927 are mix together with uniform moisture free consistency & packed into 20 Kg & 40 Kg laminated airtight GBD bag to insure 6 months validity.
Instructions:
- Always store in dry and covered place.
- For best results only add water in proper ratio.
- After application 7 to 10 days water curing is compulsory.
- Always use vibrator for precast applications.
- Always store in dry and covered place.
- For best results only add water in proper ratio.
- After application 7 to 10 days water curing is compulsory.
Features & Advantages
Features & Advantages
Easy to use & storage.
Good water proof & weather proof capacity.
Maximum compressive strength due to factory mix.
No cracks & shrinkage.
Lower the cost with effective workability.
Available around the year.
Easy to use & storage.
Lower the cost with effective workability.
No cracks & shrinkage.
Good waterproof & weatherproof capacity.
Less water requirement.
Available around the year.
Results & Specification
Results & Specification
Appearance | Greyish powder with Aggregates |
Aggregate size | 10 mm to 20 mm cubical proportionately |
Filler | 4.5 mm process sand |
Basic binder | OPC with Plastomentt. |
Pot life | 45 to 90 minutes |
Setting time | 8 to 12 hrs |
Consistency | Uniform without Segregation |
Comprehensive strength | 14.5 MPa ( 7 days) |
Appearance | Greyish powder with Aggregates |
Filler | 4.5 mm process sand |
Additives | HGP |
Basic binder | OPC with Plastomentt. |
Pot life | 45 to 90 minutes |
Setting time | 4 to 5 hrs |
Consistency | Uniform without Segregation |
Comprehensive strength | 70N/mm (7 days) |
Warning
Warning
There are no toxic materials in the product. Care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes wash gently with plenty of water, take medical advice if needed.