Description
Product Description
Plastobond BFS 918 is Ready to use solution for fixing AAC blocks , bricks & cement panels . It is prepared under recommendation of Green India Clean India concept of I.G.F with comply the requirement of ISO 9001:2015 & ISO 14001:2015 with using BBP-Technology. It is a thin premix powder of bio-materials with fine graded sand, HGP (Polymers) with Plastomentt. All ingredients of Plastobond are mix together with uniform moisture free consistency & packed into 40 Kg laminated airtight GBD bag to insure 6 months validity.
Instructions:
Store in dry and covered place.
Before Application surface must be clean from dust & oil.
Sprinkling water on surface is compulsory before Application.
For best results always add Plastobond in water with proper ratio.
Plastobond must be used with in 30 minutes after mixing with water.
For strong bonding always apply 4 to 5 mm thin uniform layer.
Proper tools to be used for Application.
Features & Advantages
Features & Advantages
Very Easy to apply.
Green Environmental product.
Self curing.
Crack free with high adhesion strength.
Constant & uniform quality.
Low cost with excellent workability.
Available around the year.
High Water Retention.
Results
Results & Specification
Appearance | Greyish powder with granules |
Water demand | 20 to 25% |
Pot life | 30 to 40 minutes |
Bulk density | 1400 – 1750 kg/ m3 |
Hard dry | 24 hours |
Compressive strength | 6 MPa |
Adhesion strength | 3.5 MPa |
Warning
Warning
There are no toxic materials in the product. Care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes wash gently with plenty of water, take medical advice if needed.